InvisiCable™ Through Wall Solution

The ultra-clean way to connect a 4K source to a 4K display when you need to span walls

 

InvisiCable™ Through Wall Solution

InvisiCable Through Wall Solution has everything you need to connect real 4K sources and displays in today’s era of multi-room installations. It utilizes InvisiCable’s game-changing solution within the room to keep the visual appearance clean and tidy for aesthetic appeal. You don’t need to to be an expert since all the components snap together with ease using standard connectors.

Features & Benefits

The Real4K™ Advantage

Proprietary multichannel optics deliver 18 Gbps over 1000m typical (400m worst case). This means 4K/60Hz, 4:4:4, and HDR support without compression, resolution limitations, or visual compromises.

Aesthetically Pleasing

No one wants to see the cables that connect your AV equipment. InvisiCable Through Wall Solution changes the aesthetics of the “in room” portion of your AV installation and uses optical wall plates to provide a clean finished look to your installation.

Better Cable Management

The InvisiCable Through Wall Solution uses InvisiCable lengths for in room usage. Any excess length can be stored in the Magic Disks that ship with the product. In addition, optical wall plates provide a place behind which to store any excess “in wall” fiber.

Strong and Sturdy

The InvisiCable Through Wall Solution uses Kevlar coated, plenum rated fiber with a very high pull strength for “in wall” usage. Because the fiber has a very small connector in the end (1/3 the size of a typical HDMI head), the fiber can be pulled more easily and with fewer mishaps vs. pulling copper or optical HDMI cables.

Designed for Specific Use

For decades, installers have been forced to adapt old cable solutions that were developed in an era when everything was in the same room. Finally, installers have the right type of solution for today’s AV environment. While maintaining InvisiCable's aesthetic appeal, this solution was designed specifically for multi-room installations.

 

InvisiCable™ Through Wall Solution Includes:

  • Two (2) 10 foot lengths of pre-terminated InvisiCable on Magic Disk spools for “in room” use (to connect displays and sources to wall connectors)
  • "Magic Disk" Magnetic ring surrounded by rubber gasket to securely store InvisiCable (Dimensions: 2.75 inches diameter x 0.7 inches height)
  • One (1) 100 foot length of high pull strength pre-terminated “in wall” fiber
  • Two (2) optical wall plates which connect the through wall fiber to the InvisiCable
  • Set of Real4K™ Optical Adapters (see below)

Real4K™ Optical Adapter Specifications

  • Full 18 Gbps Tx and Rx adapters support 4K/60Hz, 4:4:4 color, and HDR
  • Supports HDMI 1.x and HDMI 2.x signals for increased interoperability
  • HDCP 1.4 and HDCP 2.2 support for content protection ensures HDMI compliance
  • All communication, including video transport, HDCP, and maintenance, on one optical fiber
  • Open-fiber detection shuts down lasers for eye safety
  • Includes a single status LED to provide status and alerts for the connection
  • USB power cables included in the kit for complete plug and play operation

If you’d like to purchase this product, please contact one of our distributor partners.

Inneos sells its products through a network of OEM system manufacturers and authorized distributors. Contact us if you would like to become an OEM partner or authorized distributor.